| |
20/Jun/2006
Plastic Engineering & Technical Services Unveils the SSMC 951 Temperature Control System
Plastic Engineering & Technical Services (P.E.T.S.) unveiled the new Space Saving Module Control (SSMC) 951 Temperature Control System during the NPE 2006. The technologically-advanced system allows users to monitor, set-up and control the system via a computer LAN network using an Internet connection. The SSMC 951 is a user-friendly diagnostics system that delivers precise multiple zone temperature control resulting in a quality end product.
The SSMC Temperature Control Systems have a full PID control that measures temperatures at 64 times per millisecond and adjusts every three seconds. This automatic evaluation provides the ideal temperature control and minimal temperature variation above and below the temperature set point.
The new technology advanced system is easy to program and monitor with many additional features to reduce maintenance requirements and improve safety, said Bruce Casey, general manager, Plastic Engineering & Technical Services. The versatile SSMC 951 Temperature Control System requires only one controller to process all load sizes."
Plastic Engineering & Technical Services offers 12-zone SSMC that expands as production needs require. The Temperature Control Systems are offered in 12-zone, 24-zone, 36-zone, 48-zone and a 60-zone is available with 15-zone control quad rack system. Regardless of the number of zones, the controller remains the same size.
The standard features and benefits include:
Automatic Internal Switchingdetects a thermocouple reverse condition and maintains operations
Automatic Switchreads an open thermocouple and adjusts to manual mode
Automatic Shut-offfinds shorted or incorrectly wired thermocouple and turns off
SPI Communication Capabilities
High/Low Temperature Alarm Indicatoralerts operator when temperature is +/-40° F from set-point
Automatic /Manual Control Modes
Full PID Control
Warm-up Cycle
LAN Network System Monitoring, Set-up and Controlutilizing Internet Explorer or Netscape
220VAC Three Phase (Also supports 220VAC and 110VAC Single Phase)
10.4 LCD Touch Screen Displayincludes keyboard and mouse
Wet Heater Detection
Unlimited Recipe Storage<
Automatic Save of Preset System Configuration<saved at shutdown and automatic reload of last used configuration at start-up
Micro-processor Controlled<autonomous single card per zone that is user serviceable
Heaters Fused at 20A<user serviceable
Integrated Heat Sink System<rated for 4,400 Watt Heater per zone
Triac Temperature Sensing<includes high temperature alarm
High Current Bus Bar Power Distribution to Each Zone
Plastic Engineering & Technical Services, Inc., (P.E.T.S.) is a global provider of leading-edge plastics technologies, analytical services and quality product solutions to mold makers and injection molders. As a leader in the plastics industry since 1984, Plastic Engineering & Technical Services designs state-of-the-art plastics technologies and delivers quality services resulting in exceptional product performance and first-rate molding. Plastic Engineering & Technical Services specializes in Hot Runner Systems, Valve Gate Sequencers, Temperature Controllers, Mold Filling and Cooling Analysis and Secondary Equipment. In addition to its world-headquarters in Auburn Hills, Michigan, USA, Plastic Engineering & Technical Services also has offices and manufacturing facilities in China, England, Italy and India, soon in fall of 2006. ###
|
 |
